Step 2: Making a Vase [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
Step 2: Making a Vase [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ] |
|
| On the lathe, I first trim it for size, square the ends and fasten it to a custom built face plate made out of 3/4 inch solid steel, weighing 70 pounds. Even with 32 #14-4 inch screws, there still is 1 inch of sag on the outboard end. |